Give us a call: +65 6265 1970

menu

The implants of tomorrow

MAGNEZIX® CS/CSc

Keyvisual foot

METALLIC, BIODEGRADABLE AND TRANSFORMABLE

/// Description

+

The MAGNEZIX® CS/CSc is a bioabsorbable compression screw that is used to restore the bone continuity after fractures and osteotomies (osteosynthesis) as well as for treatment of arthrodeses and pseudarthroses. Specifically, the MAGNEZIX® CS/CSc is intended to achieve anatomical retention of bone sections via surgery until the bone has healed. It goes beyond temporary stabilization by serving real healing towards the end of a fully restored intact bone structure.

 

CS design features

Features

/// Design features

+

Bioabsorbable magnesium alloy

The use of MAGNEZIX® implants makes any subsequent implant removal unnecessary, and moreover, it supports the osseous healing process. MAGNEZIX® is bioabsorbable and biocompatible.


Self-tapping screw tip

The self-tapping properties of the screw tip reduce the operation time and simplify the surgical application technique.


Cannulated screw (CS 2.7, CS 3.2; CSc</sup 4.8)

The screw is cannulated (hollow) to allow controlled positioning of the screw using the guide wire. This feature supports minimal invasive surgery.


Self-tapping head thread

The self-tapping design of the screw head simplifies insertion and countersinking of the screw head.


Different thread pitches

The threads of the head and the shaft have different thread pitches. This adapted design of the screw generates compressive forces and supports the intended inter-fragmentary compression.


Surface design MAGNEZIX® CSc

The top layer of MAGNEZIX® CSc implants is converted into a dense, porous and strongly adherent magnesium-based oxide film. This surface finish acts as a protective layer and is fully bioabsorbable. A significant delay in the degradation process is achieved to maintain the desired integrity of the implant for a longer period where necessary and thus to facilitate an extended range of indications.


Various sizes

These implants are available in many different combinations of different diameters and different lengths.

 

Picture of MAGNEZIX® CS 2.0

MAGNEZIX® CS 2.0

+


Diameter

2 mm


Head diameter

2.5 mm


Lengths

08 mm | 10 mm | 12 mm |
14 mm | 16 mm | 18 mm |
20 mm | 22 mm | 24 mm

Picture of MAGNEZIX® CS 2.7

MAGNEZIX® CS 2.7

+


Diameter

2.7 mm 


Head diameter

3.6 mm 


Guide wire

1.0 mm


Lengths

10 mm | 12 mm | 14 mm |
16 mm | 18 mm | 20 mm |
22 mm | 24 mm | 26 mm |
28 mm | 30 mm | 32 mm |
34 mm

Picture of MAGNEZIX® CS 3.2

MAGNEZIX® CS 3.2

+


Diameter

3.2 mm 


Head diameter

4.0 mm


Guide wire

1.2 mm


Lengths 

10 mm | 12 mm | 14 mm |
16 mm | 18 mm | 20 mm |
22 mm | 24 mm | 26 mm |
28 mm | 30 mm | 32 mm |
34 mm | 36 mm | 38 mm |
40 mm

MAGNEZIX® CSc 4.8

+


Diameter

4.8 mm


Head diameter

5.7 mm


Guide wire

1.7 mm


Lengths

14 mm | 16 mm | 18 mm |
20 mm | 22 mm | 24 mm |
26 mm | 28 mm | 30 mm |
32 mm | 34 mm | 36 mm |
38 mm | 40 mm | 42 mm |
44 mm | 46 mm | 48 mm |
50 mm | 55 mm | 60 mm |
65 mm | 70 mm

MAGNEZIX® Pins

Keyvisual MAGNEZIX® Pins

Setting new standards

/// DESCRIPTION

+

The MAGNEZIX® Pin is a bioabsorbable bone pin that is used to restore the bone continuity of bone fragments that are subjected to low loads and dimensionally stable after fractures, for the treatment of bony avulsion fractures, and for the refixation of bone fragments and osteochondral fragments. Specifically, the MAGNEZIX® Pin is intended to achieve anatomical retention of bone sections that have been joined together via surgery until the bone has healed. It goes beyond temporary stabilization by serving real healing towards the end of a fully restored intact bone structure.

Pin design features

Features

/// Design features

+

Unique, transformable magnesium alloy

The use of MAGNEZIX® implants makes any subsequent implant removal unnecessary, and moreover, it supports the osseous healing process. MAGNEZIX® is bioabsorbable and biocompatible..


Head design

The flat designed head of the MAGNEZIX® Pin enables stable reduction of the bone fragment. Prominent protrusion of the implant involving possible damage to proximal structures can thus be avoided, and the pin head can be completely countersunk.

In addition, a recess in the pin head improves positioning of the impactor, and the impactor is prevented from slipping off the pin head during impaction.


Axial stabilizing shaft design

The symmetric collars on the pin shank result in compression of the free bone fragment during impaction of the implant. In addition, the collars increase the axial positioning precision of the implant and thus ensure reduction during the healing process.


Design of the pin tip

The tip design of the MAGNEZIX® Pin displaces cancellous bone and thus compresses the implant bed. The pin tip without any collars facilitates positioning of the MAGNEZIX® Pin in the pre-drilled implant bed.


Various sizes

These implants are available in many different combinations of different diameters and different lengths.

 

Picture of MAGNEZIX® Pin 1.5

MAGNEZIX® Pin 1.5

+

Diameter

1.5 mm


Head diameter

2.5 mm


Lengths

08 mm | 10 mm | 12 mm |
14 mm | 16 mm | 18 mm |
20 mm | 22 mm | 24 mm |
26 mm | 28 mm | 30 mm

Picture of MAGNEZIX® Pin 2.0

MAGNEZIX® Pin 2.0

+


Diameter 

2.0 mm


Head diameter

3.0 mm


Lengths

08 mm | 10 mm | 12 mm |
14 mm | 16 mm | 18 mm |
20 mm | 22 mm | 24 mm |
26 mm | 28 mm | 30 mm |
32 mm | 34 mm | 36 mm |
38 mm | 40 mm 

Picture of MAGNEZIX® Pin 2.7

MAGNEZIX® Pin 2.7

+

Diameter

2.7 mm


Head diameter

4.0 mm


Lengths

12 mm | 14 mm | 16 mm |
18 mm | 20 mm | 22 mm |
24 mm | 26 mm | 28 mm |
30 mm | 32 mm | 34 mm |
36 mm | 38 mm | 40 mm |
42 mm | 44 mm | 46 mm |
48 mm | 50 mm

Picture of MAGNEZIX® Pin 3.2

MAGNEZIX® Pin 3.2

+


Diameter

3.2 mm 


Head diameter

5.0 mm


Lengths 

12 mm | 14 mm | 16 mm |
18 mm | 20 mm | 22 mm |
24 mm | 26 mm | 28 mm |
30 mm | 32 mm | 34 mm |
36 mm | 38 mm | 40 mm |
42 mm | 44 mm | 46 mm |
48 mm | 50 mm

MAGNEZIX® CBS

Keyvisual MAGNEZIX® CBS

Superior versatility

/// Description

+

MAGNEZIX® CBS is a bioabsorbable bone screw that is used to restore the bone continuity after fractures and osteotomies (osteosynthesis) as well as for treatment of pseudarthroses. Specifically, the MAGNEZIX® CBS is intended to achieve anatomical retention of bone sections that have been joined together via surgery until the bone has healed. It goes beyond temporary stabilization by serving real healing towards the end of a fully restored intact bone structure.

MAGNEZIX® CBS features

Features

/// Design features

+

Unique, transformable magnesium alloy

Use of MAGNEZIX® implants makes any subsequent implant removal unnecessary, and moreover it supports the osseous healing process. MAGNEZIX® is bioabsorbable and biocompatible.


Head design 

The head of the MAGNEZIX® CBS, with a typical cortical screw design, allows for stable repositioning of the bone fragment, with exquisite compression characteristics.


Patented safety drive design

The special design of the TORX-based drive protects the implant in the shaft and head area from failure. If the torsional load is too high during the insertion process, a targeted deformation of the screw head drive takes place. As a result, subsequent steps can be continued using a hexagonal screwdriver blade.


Thread design

The thread design, which is typical for cortical screws, produces a strong fixation in cortical bone. A dimension-dependent thread pitch supports the controlled compression of bone fragments.


Screw tip 

The additionally existing chip flutes improve the thread quality and ease the screwing-in. However, a precutting of the thread in cortical bone is required.


Various sizes

These implants are available in many different combinations of different diameters and different lengths.

 

Picture MAGNEZIX® CBS 2.0

MAGNEZIX® CBS 2.0

+


Diameter

2.0 mm


Head diameter

4.0 mm


Lenghts

06 mm | 08 mm | 10 mm |
12 mm | 14 mm | 16 mm | 
18 mm | 20 mm

 

 

[] Bild MAGNEZIX® CBS 2.7

MAGNEZIX® CBS 2.7

+


Diameter

2.7 mm 


Head diameter

5.0 mm 


Lenghts

06 mm | 08 mm | 10 mm | 
12 mm | 14 mm | 16 mm | 
18 mm | 20 mm | 22 mm |
24 mm | 26 mm | 28 mm |
30 mm

 

[] Bild MAGNEZIX® CBS 3.5

MAGNEZIX® CBS 3.5

+


Diameter

3.5 mm 


Head diameter

6.0 mm


Lenghts 

08 mm | 10 mm | 12 mm |
14 mm | 16 mm | 18 mm |
20 mm | 22 mm | 24 mm |
26 mm | 28 mm | 30 mm |
32 mm | 34 mm | 36 mm |
38 mm | 40 mm

MAGNEZIX® StarFuse®

TRANSFORMABLE, OSTEOCONDUCTIVE, INFECTION-INHIBITING

/// Description

+

The MAGNEZIX® StarFuse® is a bioabsorbable intramedullary arthrodesis implant that is intended for adaptation-capable or exercise-capable fixation of small bone reconstruction strictly limited to interphalangeal fusion of the lesser toes (PIP arthrodeses). It combines the globally unique MAGNEZIX® material technology with a similarly innovative new geometrical approach towards foot surgery.

MAGNEZIX® CBS features

Features

/// Design features

+

Unique, transformable magnesium alloy

MAGNEZIX® does not leave any foreign material behind in the body, and moreover it supports the osseous healing process. MAGNEZIX® is biocompatible and bioabsorbable.


Patented wing design

Two small-sized wings act as a mechanical stop during insertion and following reduction of the more distal phalanx. This innovative design feature ensures stable axial implant positioning.


Star-shaped profile

Deep cutting longitudinal flutes guarantee proper rotational stability for optimal fixation.


Blunt ends

The blunt end design ensures secure implant position via reducing the risk of axial implant displacement.


Conical design

The conical shape of the proximal and distal end allows fast and easy insertion. This design aspect further achieves proper intra-medullar press-fit anchoring.


Various sizes

These implants are available in two angles, 0° and 10°, each with three different distal lengths.

 

StarFuse®

+

With 0° angulation for straight-angled fusion.

 


Proximal length

12.0 mm


Distal length

6.0 mm (Small)

7.0 mm (Medium)

8.0 mm (Large)

 

StarFuse® 10°

+


With 10° angulation for slightly angled fusion.

 


Proximal length

12.0 mm


Distal length

6.0 mm (Small)

7.0 mm (Medium)

8.0 mm (Large)